Zombicide: Green Horde also features another type of obstacle, that is the exact opposite of Hedges. Barricades prevent movement, but not line of sight. It’s less common in Zombicide scenarios, …

I had already made some walls for Zombicide in a previous post, but I didn’t have enough to correctly fill all scenarios. So I decided to make more. First time I had been using some old …

I made this to represent a “furnace”, supposed to be abandoned in the basement of an old building. To be honest, I have no idea what a furnace is actually supposed to look like, …

Hedges in Zombicide: Green Horde block line of sight but not movement. I needed a way to represent them in a 3D environment, and I needed LOTS of them. I initially bought a whole lot of plastic …

The final type of tiles to do were “Stairs” (or Legde) Tiles, to get out of Sewer Tiles without incurring movement penalties. As one can get out to street level or dirt level, I had to …

I kept going on the Zombicide Tiles, this time with the Sewer ones. In Zombicide: Green Horde, some tiles are covered with sewage. Movement is slower, and they are supposed to be lower in the ground …

I realized I needed more torches and braziers to act as dressing in my adventures. One scenario specifically that I intend to run by my players requires them to be wary of light sources, so I needed …

Dungeon Tiles are great, but they are not enough to convey the mood of each room adventurers explore, especially in large dungeons. Scatter pieces, or dressing, are what really “sells” …

I sometimes need to mark some areas of a room as collapsed. Even for no specific reason, adding collapsed markers help create some difficult terrain and some challenge in encounters. For the scenario …

Next up would be the road tiles. For those, I went with a stone pattern that still let see the 3x3 matrix inside. I thought that even outside of Zombicide, I could use those tiles in other tabletop …

After my stone and earth tiles, I also needed to work on the wooden tiles. As you can see in the picture, I made some simple and some double tiles, to represent the two sizes of rooms available in …

I have started a large project of recreating 3D versions of the Zombicide: Green Horde board. I did a first version with MDF boards for each large tile, but this time I went with something more …